.

.

Çıkış Mantık Denetleyici Modülü FX1N - 20MR Röle Gecikme endüstriyel kontrol panosu Endüstriyel Otomatik Kontrol için

Çıkış Mantık Denetleyici Modülü FX1N - 20MR Röle Gecikme endüstriyel kontrol panosu Endüstriyel Otomatik Kontrol için

₺ 296.40

Stokta
Mağazada

100 % marka yeni ve yüksek kaliteli.İş performansı istikrarlı ve güvenilirdir.Küçük gövde ve istikrarlı performans.Dahili zamanlama devresi, modülün uzun süreli çalışmasını etkili bir şekilde sağlayabilir.Bu modül programlanabilir ve binlerce işlevi gerçekleştirebilir. 1. 100 % marka yeni ve yüksek kaliteli. 2. Küçük gövde ve istikrarlı performans. 3. Bu modül programlanabilir ve binlerce işlevi gerçekleştirebilir. 4. İş performansı istikrarlı ve güvenilirdir5. Dahili zamanlama devresi, modülün uzun süreli çalışmasını etkili bir şekilde sağlayabilir .

Karakterislikler teklif

Condition:
100% Brand New
Model:
 FX1N-20MR
Power Supply:
10-28VDC
Working Voltage:
24VDC
Weight:
Approx. 165g / 5.8oz
  :
Function:
1. Turn on the power, the relay 1 is closed after N seconds of closing; then the relay 2 is closed after N seconds of closing. :
2. Turn on the power, the relay 1 is turned off after N seconds of closing; then the relay 2 is turned off after N seconds, and then cycles. :
3. When the power is turned on, the relays 1 and 2 are not activated. When there is a signal or a button is triggered, the relay 1 is turned off after N seconds is closed; then the relay 2 is turned off after N seconds and then turned off until the next trigger, repeating the same action. :
By programming the signals 1, 2, any control of the relays 1 and 2 can be achieved. :
4. When signal 1 has a signal, relay 1 is closed and relay 2 is turned off; 5. When signal 2 has a signal, relay 1 is turned off and relay 2 is closed. :
6. Only the NPN sensor signal can be connected, and the sensor signal can be programmed to realize any control of the relay. :
7. When signal 1 has a trigger, control relay 1; when signal 2 has a trigger, control relay 2. :
8. Turn on the power, control the motor to rotate for N seconds, then reverse N seconds, and cycle. :
9. When the signal 1 has a signal, the motor is controlled to rotate forward; when the signal 2 has a signal, the motor is reversed. :
  :
Package List:
1 * Relay Module :

Alıcılar da seçin